In 2016 Locosys introduced the GW-60, a high frequency GPS Unit that supports Doppler Speed & Doppler Speed Error (SDOP).
GW-60 is a GPS instrument optimized to measure speed using GPS-Doppler effect, designed specifically with GPS Speedsurfing in mind.
Order directly at
https://shop.gps-speedsurfing.com/gps-devices? GP3S offers world-wide shipping !
GW-60 is a solid highly-refined and wearable GPS for water sports, it is the natural heir to the LOCOSYS’ Surfing GPS series (GT-11, GT-31 and GW-52). It can be defined like a multi-sports activity watch, but the abaility to record data in DOPPLER format makes it unique in the world. This is the crucial factor that differentiate the use of this GPS for speedsurfing and that’s: “verifiability” . This all results in a very high level of measurement of GPS data and a world wide competition of windsurfers & kiters.
- Top 10 speed smart record
- Intelligent session speed report
- 10-seconds average speed display
- Multi-functional push button operation
- High sensitivity GPS performance
- Rechargeable lithium-ion battery
- Time mode (Alarm, Timer, Stopwatch)
- Google Earth KML/GPX format support
- Built in flash memory to store 1,000,000 GPS logged points
- Waterproof 50 m/ 5 ATM
- Size 49(Φ) * 14.5 (H) mm
Weight 57 g
Display LCM 128X128 FSTN Black/White
MCU STM32 Cortex®-M3
GPS LOCOSYS GPS
Battery type Rechargeable lithium-ion battery 250 mAh
- Waterproof 50 m/ 5 ATM
- M e m o r y Flash memory for 1,000,000 GPS points
Connection USB charging clip
- Clock Auto Sync with GPS Time
- Alarm Buzzer and Vibration
- Speed Data logging rate: 1Hz, 5Hz, or "smart" rate
Log record includes: UTC time, position, altitude, Doppler Speed over ground, Doppler vertical speed, satellites used, Standard Deviation of Speed (SDOS) Speed sample resolution: 1 cm/s
SDOS resolution: 1 cm/s
Measured speed range 0-1000 km/h
Typical accuracy of 10s average speed measurement:
~3 cm/s, 99.7% certainty
Accuracy of specific measurement can be determined from SDOP of speed samples used to compute average speed.
The default”USB CLASS/connection setting is "COM" mode (USB virtual COM port connection for utility software) But it can be switched to Mass-Storage-Class (MSC) mode via the GW60 settings menu at any time. Use the Mass-Storage-Class (MSC) mode for access from non-windows devices (for example Mac OSX), change it to this mode in the settings-menu at the watch before connecting it by USB, after that the downloads of session-data can be done via the Mass-Storage-Class (MSC) mode. Make sure that you upgrade the firmware to the latest version (minimum V1.0G1206A) to fully enable this feature !
Downloads for the GW-60 (all from Locosys)
Here you find some additional files (manuals, drivers and utils) for the GW-60. The firmware update utility, and the settings and download utility to use in COM mode are still Windows only. For the settings and download, this is not an issue for Mac users as the settings can all be done in the watch and the downloads can be done via the Mass-Storage-Class (MSC) mode.
The latest firmware can be found here. Locosys has justed released a new Firmware version for the GW-60, as mentioned before this firmware will upgrade your GW-60 to a fully featured GPS device for speedsurfing. Included are several new result screens, including @500, 100m, 250m , 500m and many more ! This new version will be online in a few days time, The following Dropbox has the firmware pack. The pack includes:
- New firmware file, use the existing GW60 updater to upload onto your watch
- Release note which details the history of changes to the firmware during testing
- Watch set-up config instructions for the new features
- Installer for the new Utility for Log file downloading and watch configuration. Note this only works with Window's PCs
Problems with updating firmware ?
We have reveived some feedback from both Windows & Mac users who have experienced some troubles with upgrading the firmware. During the initial stage of the update the Wach occasanily? freezes, the back-light stays on and the watch doesn't seem to respond anymore. Based on the info we have this situation occurs on Mac running with virtual-machines (Virtualbox of VMWare) and some Windows machines. We recommend not to perform the upgrade of the firmware on virtual machines. For Windows machines, make sure that it run so 'clean' as possible, so remove/disable any other software components related to serial communications (like software for Suunto, TomTom, etc etc). When this situations occurs the best is to let the battery run down, this can take several hours (up to 10-12 hours), after this the Watch is working normal again, and the firmware procedure must be initiated again.
AUTO SLEEP 0
MIN SPD 0KH (OR KT)
UNIT KM (OR KT)
GMT +2.00 (FOR WESTERN EUROPE)
AVG NSEC 10S
AVG MSEC 2S
SPD GENIE 10KH
ACT SPD SPEED
RSLT 1A NSEC
RSLT 1B NSEC
RSLT 2A MAX
RSLT 2B TOP
RSLT 3A 100M
RSLT 3B 250M
RSLT 4A 500M
RSLT 4B @500
RSLT DIST X
RSLT TIME X
DIST UNIT KM
USB CLASS UMS
SCREEN FLIP X
TIME FMT 24H